Chongqing Fugui Electronics: Identify Its Wi-Fi Device

Chongqing Fugui Electronics Co., Ltd. is a China-based electronics company whose name can appear on your Wi-Fi device list when your router identifies a device by its MAC address. The unfamiliar name may belong to the network hardware inside a device you already recognize, not a separate gadget or an intruder. To identify it, compare the router entry with your devices’ active network addresses, then confirm the match by disconnecting and reconnecting the suspected device.

What the Chongqing Fugui Name Means on Your Network

Chongqing Fugui Electronics is registered against MAC address allocations and has a listed address in Chongqing, China.

A MAC address identifies a network interface on a local network. For globally assigned addresses, its prefix can identify the organization that registered the address allocation. Routers and network-management tools can use that information to supply a vendor name when a useful device name is unavailable.

That explains why a familiar computer, printer, television, or other connected product can appear under an unfamiliar company name. The company associated with its network interface does not have to match the brand printed on the finished product.

A vendor name is a clue to the network interface, not proof of the device’s retail brand, owner, or trustworthiness.

The name also does not tell you where the device is sending traffic. A Chinese company name in a client list is not, by itself, evidence of a connection to a server in China.

How to Identify a Chongqing Fugui Device on Your Wi-Fi

Start with identification rather than blocking. Otherwise, you may disable the connection of the computer or phone you are using to investigate.

Use the evidence available to decide how much confidence to place in the entry:

Evidence Available What You Can Conclude What Still Needs Checking
Only the Chongqing Fugui vendor name The router has assigned a manufacturer label Which physical device owns the connection
A matching MAC prefix The address matches a vendor allocation The identity of the individual device
A full MAC address matching an authorized device The entry corresponds to that device’s interface Whether the entry reflects its current connection
A matching address and a controlled disconnect/reconnect The network entry is tied to the device you tested Whether any unwanted restrictions remain

Step 1: Record the Router Entry

  1. Open your router’s management interface or companion app from a trusted, connected device.
  2. Find its connected-device or client list.
  3. Open the Chongqing Fugui entry and record the full MAC address, local IP address, hostname, connection type, and connection status, where available.
  4. Note whether it is currently connected or merely retained in the router’s device history.

Use the full MAC address as the main comparison value. A local IP address can change, and a hostname may be missing or misleading.

Keep the router-management session available while you investigate. Do not begin by resetting the router or deleting its configuration.

Step 2: Check the Registered MAC Prefix

The following 25 registered MAC prefixes, listed by MAC Address Lookup, are associated with Chongqing Fugui Electronics:

18:47:3D    1C:BF:C0    28:CD:C4    40:23:43    40:5B:D8
4C:D5:77    4C:EB:BD    5C:3A:45    5C:BA:EF    5C:FB:3A
64:6C:80    6C:AD:AD    74:12:B3    8C:C8:4B    A4:97:B1
A8:93:4A    AC:D5:64    B0:68:E6    B4:B5:B6    C0:B5:D7
C8:94:02    D4:1B:81    D8:12:65    E8:6F:38    EC:5C:68
  1. Compare the beginning of the router’s MAC address with the prefixes above.
  2. Ignore differences in capitalization or colon-versus-hyphen formatting.
  3. If a prefix matches, treat it as confirmation of the vendor allocation, not identification of the finished product.

For example, an address beginning with 18:47:3D matches a Chongqing Fugui allocation. You still need the rest of the address to distinguish your device from another device using that prefix.

Each MA-L block contains 16,777,216 addresses. That is the capacity of the allocation, not a count of devices manufactured, sold, or connected to your network.

A nonmatching prefix is not automatically suspicious. The label may be cached, the lookup database may differ, or the device may be using an address that does not reliably identify a manufacturer.

Step 3: Compare the Full Address With Your Devices

  1. On each likely device, open the details for its active network connection.
  2. Find the MAC address, which may be labeled Wi-Fi address, physical address, or hardware address.
  3. Compare the entire address with the router entry.
  4. Record which device and connection produced the match.

Start with devices that are currently online: computers, phones, televisions, streaming devices, printers, and other connected equipment.

Compare like with like. For a wireless router entry, inspect the device’s active Wi-Fi connection rather than its Ethernet or Bluetooth address. Use the address shown for the current network instead of assuming a factory label gives the address in use.

A full match is much stronger evidence than a vendor name, approximate connection time, or recognizable hostname.

Step 4: Confirm With a Controlled Disconnect and Reconnect

  1. Choose the suspected device and make sure interrupting its connection will not disrupt important work or a safety-critical function.
  2. Disconnect that device from the network through its normal network controls.
  3. Refresh the router’s client list and check whether the matching entry changes to disconnected or stops showing a live connection.
  4. Reconnect the device.
  5. Refresh the client list again and verify that the connection returns.
  6. Test the device’s normal function, such as opening a webpage or using its network-dependent feature.

Test devices individually so the change is attributable to a specific device. Do not disconnect the router itself.

The entry may remain visible after disconnection because routers often retain previously connected clients. Look for a change in connection status rather than requiring the name to disappear.

Step 5: Resolve the Entry Without Leaving Access Broken

  1. If you identify an authorized device, give the router entry a recognizable name. Remove any pause or block applied during troubleshooting, then verify that the device can reconnect and perform its normal network task.
  2. If the entry is offline and still unidentified, retain its address and details for comparison if it reconnects. An old listing alone does not establish current unauthorized access.
  3. If a live connection remains unidentified, use the router’s client-blocking feature as a temporary restriction while continuing the investigation. Keep a trusted management connection available and check whether an authorized device loses service.
  4. If you establish that access is unauthorized, change the affected Wi-Fi network’s passphrase and reconnect only recognized devices. Reopen the client list and verify that your authorized devices work and that no unexplained live client remains.

If blocking the entry disables a device you recognize, restore access and confirm the full MAC address before deciding what the entry represents. A router pause affecting a computer’s internet connection does not establish that the vendor name represents a separate component embedded in its BIOS.

Why the Device May Be Hard to Match

Private addresses, multiple interfaces, virtual machines, cached records, and copied MAC addresses can make a legitimate client appear unrelated to the device in front of you.

Private and Randomized MAC Addresses

Some devices use a private or randomized MAC address for a Wi-Fi network. That address can differ from the hardware address printed on the device or shown in a general hardware-information screen.

For these devices, the useful comparison is the address shown in the details of the current Wi-Fi connection. You do not need to disable address privacy just to identify the connection.

Locally administered addresses also may not support a meaningful manufacturer lookup. An unknown or unexpected vendor result can therefore reflect address behavior rather than unfamiliar physical hardware.

Multiple Interfaces and Virtual Machines

A device can have different MAC addresses for Wi-Fi, Ethernet, and an external network adapter. Comparing the wrong interface can make a legitimate client appear unrelated to the computer in front of you.

Virtualization adds another possibility. A bridged virtual machine may appear as a separate network client with its own virtual MAC address. A virtual machine or container using the host’s NAT connection usually does not appear as a separate Wi-Fi client.

On a development machine, check whether the entry belongs to the physical network interface or a bridged guest before assuming there is another physical device nearby.

Cached Names and Historical Records

A manufacturer label may persist after a device disconnects or after the router learns more about it. DHCP records can also outlast the active connection.

Pi-hole device listings may display a manufacturer name for a device, but such a label is not itself proof of a live Wi-Fi association. For current connection status, use the router or access point that manages the connection.

A retained name, an IP lease, and an actively connected client are different pieces of evidence. Treat them separately.

Copied MAC Addresses

MAC addresses can be changed or copied. A matching prefix therefore cannot establish that a device is genuine, and a vendor-based allowlist is not a substitute for Wi-Fi authentication.

For ordinary identification, a full address match plus a controlled disconnect and reconnect provides useful confirmation. For suspected unauthorized access, also consider who controls the device and whether it should have the network credentials.

Confirm the Device and Keep Your Network List Clear

Before closing the investigation, check that:

  • The router entry is associated with a physical device or a known virtual interface.
  • The device is reconnected and its normal network functions work.
  • Any accidental pause or block has been removed.
  • The entry has a recognizable name.
  • Any unresolved live connection remains restricted while you determine ownership.

For ongoing clarity, keep a small inventory of devices and the interfaces you have identified. Record a device’s purpose alongside its address rather than treating the vendor label as its identity.

Continue applying router and device software updates, and review unfamiliar live clients when they appear. You do not need to treat every unfamiliar manufacturer name as an incident; you do need a reliable way to connect each active entry to something authorized.

Once the match is confirmed, rename the entry and return the device to normal use.

Frequently Asked Questions

What Products Does Chongqing Fugui Electronics Manufacture?

Chongqing Fugui Electronics is connected with network hardware through its MAC address registrations, but those registrations do not provide a complete product catalog. Those registrations alone cannot identify a particular wireless chip, adapter, computer, printer, or television model. A specific manufacturing claim needs product documentation or other direct company evidence.

Can a TCL TV Appear as Chongqing Fugui Electronics?

A television can appear under a network-component supplier’s vendor name, but the Chongqing Fugui label alone does not establish that the device is a TCL TV. Compare the television’s active network MAC address with the full address in the router entry. A confirmed match identifies that television’s connection, not a manufacturing relationship across all TCL products.

What Is the Official Chongqing Fugui Electronics Website?

An official company website cannot be confirmed from the available evidence. If you need drivers, firmware, or support for an identified device, use the finished product’s manufacturer support site rather than searching for downloads under the router’s vendor label.

Are “Chongqing Fuji” and “Chongqing Fugui” the Same Company?

Similar spellings do not establish that they are the same company. “Chongqing Fugui Electronics Co., Ltd.” is the vendor name associated with the MAC prefixes listed here; “Chongqing Fuji” or “Congqingfugui” may be search misspellings. Match the actual MAC address rather than relying on a similar-looking name.